Features:

Heart/pulse rate: it is measured with the parameters ECG, oximetry and non invasive blood pressure (NIBP).

Electrocardiography (ECG):

•  The monitor provides continuous processing of 5-lead ECG, with standard lead selections, and filtering from electrocautery discharge.
•  The user can view up to 3 waveform channels simultaneously.

Oximetry: The oximetry parameter provides the continuous non-invasive monitoring of oxygen saturation (%SpO2) in the blood and pulse rate (PR).

Non invasive blood pressure (NIBP):

•  The non-invasive blood pressure (NIBP) parameter provides systolic, diastolic, and mean arterial blood pressure values, and heart rate.
•  NIBP measurements can be made in automatic, manual, or STAT modes.

Respiratory rate (RR): The monitor provides respiration rate and Resp waveform by measuring the thoracic impedance between two ECG electrodes on the patient’s chest.

Temperature (TEMP): Two independent channels of temperature (T1 and T2) monitoring are available

CO2:

•  The monitor determines CO2 concentration in the breathing gases by measuring the amount of light absorbed by these gases.
•  EtCO2 is display as a numerical value in millimeters of mercury (mmHg), percent (%), or kilopascals (kPa).
•  In addition, a CO2 waveform (capnogram) may be displayed which is a valuable clinical tool that can be used to assess patient airway integrity and proper endotracheal tube placement.
•  Respiration rate is calculated by measuring the time interval between detected breaths.

Display:

•  The monitor has a high-resolution, high-contrast, color LCD display.
•  It provides a continuous, real-time display of up to four waveforms.
•  It also shows measured values, chronological data, measurement trends, alarm limits and patient information.

Internal battery:

•  The installed internal rechargeable battery is intended primarily for backup and switch-over use.
•  Typical battery life is 2 to 5 years depending on usage.
•  A fully charged battery will last 2 to 3.5 hours, depending on monitor usage.

Technical specifications:

Display:

•  7-inch diagonal high-resolution TFT (Thin Film Transistor) Active Matrix LCD
•  Resolution: 800 x 480 pixels.

Indicators:

•  Work Status LED
•  AC Power LED
•  Battery Charge LED
•  Battery Supply LED
•  Alarm Silence LED

Alarm volume: 45dBA to 85 dBA at 1 meter distance (adjustable)

ECG:

•  Heart rate range: 20-350 bpm
•  Heart rate accuracy: 2 bpm o ± 2% ((whichever is greater)
•  QRS detection range: 0.5 to 5 mV
•  Pace pulse detection: Amplitude: 2 mV to 700 mV
•  Detection duration: 0.1 – 2.0
•  Alarm ranges heart rate:
  •  High: 20-350 bpm and off
  •  Low: 20-350 bpm and off
•  Heart rate averaging: Fixed 8 second averaging
•  Lead selection: I, II, III, V, aVR, aVL, or aVF (5 lead)
•  Display gain settings: X1/4, X1/2, X1, X2, X4
•  Input range: -5.0 mV to +5.0 mV
•  Frequency response: 0.05 Hz to 40 Hz
•  Input impedance: > 5 Mohms differential, as required and tested per ANSI/AAMI EC-13.
•  Leakage: < 10 uA
•  Patient isolation: > 4000 VCA
•  Display waveform: 120 Hz; 6.25, 12.5, 25, or 50 mm/s
•  Update rate digits: 1 Hz

SpO2:

•  SpO2 range: 0-100%  Functional Saturation
•  SpO2 accuracy:
  •  ± 2% @ 70-100%
  •  <70% unspecified
•  Pulse rate range: 20-350 bpm
•  Pulse rate accuracy: ± 2 bpm o ± 2% (whichever is greater)
•  SpO2 alarm ranges:
  •  High: 50 – -100% and off
  •  Low: 50 – -100% and off
•  Calibration: Factory calibrated over range 50% to 100% SpO2 using human blood samples to functional saturation.

NIBP:

Blood Pressure Measuring

•  Method of measuring: Oscillometric with step-down deflation
•  Range: Systolic: 40 to 270 mmHg
•  Mean arterial: 30 to 220 mmHg
•  Diastolic: 20 to 200 mmHg
•  Pulse: 25 to 300 bpm
•  NIBP accuracy:  Algorithm based on human algorithm that meets or exceeds accuracy requirements of ANSI / AAMI SP10:1992 and 2002 standards for non-invasive blood pressure using the oscillometric method.

Inflation Pressure Settings

•  Measurement time: 30 to 50 seconds (typical), 120 seconds maximum.
•  Default Inflation Pressure:
  •  120 mmHg – Adult
  •  100 mmHg – Pediatric
  •  90 mmHg – Neonatal
•  Calibration: Factory calibrated
•  AUTO interval times: 2, 3, 5, 10, or 30 minutes, or 1, 2 hours 20-260 (in 1 mmHg steps), and off
•  Alarm range: 25- 250 bpm, ± 2% or ± 3 bpm ((whichever is greater)
•  Pulse rate accuracy: 251-300 bpm, ± 5%

Respiratory rate (RESP):

•  Range: 0-120 breaths per minute (bpm)
•  Accuracy: ±1 bpm
•  Resolution: 1 bpm
•  RESP alarm range:
  •  High: 0-120 bpm (1 bpm steps) and off
  •  Low: 0-120 bpm (1 bpm steps) and off

Temperature (TEMP):

•  Channel: Two
•  Range: 25-45ºC
•  Accuracy: ± 0.2ºC plus the temperature sensor tolerance
•  Resolution: 0.1ºC
•  TEMP alarm range:
  •  High: 35.5-43.5ºC and off in 0.1 increments
  •  Low: 35.5-43.5ºC and off in 0.1 increments

CO2:

•  Sampling mode: Sidestream
•  Measuring parameters: Respiration rate, EtCO2 and InsCO2.
•  CO2 warm-up time: 10 seconds.
  •  Measurement range CO2: 0~150mmHg
  •  Respiration rate: 2~150bpm
•  Accuracy:
  •  0~40mmHg ±2mmHg
  •  41~150mmHg ±10% of reading
•  Resolution: 0.1mmHg
•  Flow rate: 50 ml/min±10 ml/min

Supply requirements: AC input: 100 to 240 V, 50/60 Hz

Dimensions:

•  Width: 300 mm.
•  Length: 180 mm.
•  Height: 130 mm.
•  Unit weight: 2 kg. approx.
•  Total weight: 3.6 Kg. approx.

Environmental protection:

•  Temperature:
  •  0 to 50ºC (operation)
  •   -40 to 75ºC (storage)
•  Humidity:
  •  15 to 95% (operation)
  •  10 to 95% (storage)

Classification:

•  Type of protection (against electric shock): CLASS I (internally powered)
•  Mode of operation: Continuous
•  Degree of protection (against ingress of liquids): IPX1, drip proof
•  Degree of mobility: Portable
•  Degree of protection (against electric shock): Type CF
•  Safety requirements: EN60601-1:2002

Includes:

•  Vital signs monitor
•  ECG cable 5 leads
•  Temperature probe
•  Reusable finger oximetry probe for adults
•  NIBP tube with cuff adult 27-35 cm
• CO2 accessories
•  Internal battery
•  Power cable
•  User manual

Certification:

•  Directive 93/42/EEC on Medical Devices.